HP ProCurve User Manual

9-14
Monitoring Network Traffic
Traffic Data Collector Settings
Traffic Data Storage
You can specify some criteria to control how much data is collected. Select
Traffic Data Collector Settings from the Performance button in the navigation
frame, then select the Storage tab. Your current settings are displayed in the
Current Storage Status on Server area. The Historic Traffic Data collection area
displays the following choices:
■ Storing data up to a maximum number of days of data or a maximum
amount of data, whichever occurs first. The default is 31 days, up to 100
MB. You can click the Default Values button to set these values.
■ Storing data up to a maximum amount of data (in Megabytes).
■ Stopping collection of historical traffic data for analysis by the Network
Performance Advisor.
Figure 9-5. The Traffic Data Collector - Storage Settings Page
Note To stop data collection, you must stop all of the HP TopTools services. Click
on the Settings tab in the navigation frame and select TopTools Services. On the
Services page click on the Stop Services button.

HP ProCurve Specifications

General

Brand	HP
Model	ProCurve
Category	Switch
Language	English