Accessing Hub Features
Configuring Your Device
12-9
Medium Sensitivity: The device will act when serious network problems
occur.
Low Sensitivity: The device will act only when severe network problems
occur. These are problems that may bring the network down.
Never: The device will never take any actions regardless of the severity of the
problem.
Figure 12-7. Fault Detection Sensitivity Settings
System Information
The System Information page lets you enter a system name for the device, the
location of the device, and whom to contact in the event of a problem.
Configuring IP
Select the way that you want IP addresses configured for your network:
■ Manual—Set the IP address through the console.
To Next Page
Loading...
