HP ProCurve User Manual

14-16
Setting Up Security for a Device
Switch Port Security
Note The IP Mask is a method for recognizing whether a given IP address is
authorized for management access to the switch. This mask serves a different
purpose than IP subnet masks and is applied in a different manner.
Figure 14-7. Switch Authorized Addresses List
To configure IP Authorized Managers:
1. Select the Authorized Addresses button in the Security screen.
2. Enter an Authorized Manager IP address.
3. Select an Access Level.
4. Use the default mask to allow access by one management station, or edit
the mask to allow access by a group of management stations.
5. Click on Add to add the entry to the list.
Configuring Port Security
To configure Port Security perform the following steps:
1. Double-click on the selected switch to display its web browser interface.
2. Click on the Security tab.

HP ProCurve Specifications

General

Brand	HP
Model	ProCurve
Category	Switch
Language	English