Quick Start
Configuring and Monitoring Devices
1-7
Note Double-clicking on a device in the Devices page that is not a hub or switch
will display information about the device’s identity and status.
Note Double-clicking on an HP device that does not support a browser interface
will launch the Closeup View of the device in a separate window if you are at
the management station.
Figure 1-5. Device View - Status Page
The tabs in the Device View page provide access to various configuration
features for the device. You can enable and disable individual ports (click on
the port to select it), or click on the Select All Ports button to enable or disable
all the ports of a device in one step.
See Configuring Your Device
for more information about using the Device
View. To obtain generic SNMP information about devices that cannot be
managed with a browser, select Properties
from the Actions menu at the top of
the Devices page.
Use the online help to obtain more information about configuring devices that
cannot be managed in a browser.
To Next Page
Loading...
Need help?
General