16-10
Downloading Software
The HP Download Manager
3. Next, while holding the cursor over any selected item, click the right
mouse button. Select the Update Firmware... option. The Download Control
dialog box appears. Alternatively, you can click the Actions button and
select Update Firmware... from the menu.
Figure 16-6. Download Control
When the Download Control dialog box appears, it lists the devices you
selected along with the version numbers of the software currently loaded on
each. Compare this version number with the version available for down-
loading. If the versions are the same, you need not proceed further. If the
“Download Version” is older than the “Current Version” you probably have an
outdated CD in your drive. Do not proceed; visit the HP ProCurve web page
(http://www.hp.com/go/procurve) or call your authorized HP representative
to obtain the latest files. If the “Download Version” is newer than the “Current
Version” you can highlight the item(s) and proceed.
If you have to change the community names of the devices in order to
download the file to all of them simultaneously, click the Community Name...
button. This opens the Change SET_COMMUNITY_NAME dialog box. Enter the
new community name in the “SET_COMMUNITY_NAME” field and click the
OK button. Note, however, that if you selected more than one device, the
community name you enter must be valid for all of them.
Allows you to change the
Community Name of the devices for
simultaneous downloads.
To Next Page
Loading...
Need help?
General