Table 38 Error codes (part code 3305) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the status and wait until the status
changes to a status that maintenance is
possible.
Preparing for quick format.656913305
WCheck the specified volume.The specified volume is not available to
execute VLL operation (Create LDEVs,
Delete LDEVs).
657283305
WCheck the specified volume, and retry
the operation.
The system disk cannot be set on the
specified volume.
657303305
WCheck if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
The configuration changing processes
are conflicting at DKC.
657403305
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
657413305
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
657423305
WWait for a while, then click [Refresh] on
the [File] menu. When an error occurs
during login, wait for a while and login
again.
The disk subsystem is in internal process,
or some other user is changing the
configuration.
657683305
WCheck the specified volume.The specified volume contains a quorum
disk.
657813305
WCheck the specified volume.The specified volume includes a remote
command device being used by a mirror
of the journal group.
657903305
WSet the Audit Log buffer function to
"Disable," then retry the operation.
The specified volume includes a system
disk being used by the audit log.
688023305
WYou cannot have a 3390-V volume in a
RAID 1 (2D+2D) parity group.
If you create a 3390-V volume, specify
a parity group other than the RAID
1(2D+2D).
If you do not create a 3390-V volume,
change to emulation type to a different
one.
The volume of 3390-V cannot be created
with the RAID level of the specified parity
group.
750173305
WVerify the available LDEVs.The specified LDEV cannot be used
because the LDEV has no access right
for a resource group.
765073305
WVerify the available parity groups.The specified LDEV cannot be used
because the parity group the LDEV
belongs to has no access right for a
resource group.
765083305
WCheck the specified Processor Blade.The specified Processor Blade is not
mounted.
780323305
WRelease the Fixed attribute, or specify a
mounted Processor Blade.
AUTO cannot be specified because the
Fixed attribute has been added to all of
the Processor Blades.
780333305
Part code 3305 109
To Next Page
Loading...
