2 Message (part code group 0nnn)
This chapter includes the error messages with the part code 0001 to 0810.
Part code 0001
Table 1 Error codes (part code 0001)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
10000001
EThe SVP reboots automatically. If the
same error occurs despite retrying,
please contact HP Technical Support.
A time-out error occurred. Please wait
for the SVP to reboot, and then retry the
operation.
10010001
EIf this problem persists please contact HP
Technical Support.
The specified volume cannot be set as a
command device or a component of a
LUSE volume, because it is being used
as a Continuous Access Synchronous,
Business Copy, or XP Flex Copy volume.
Select another volume.
10020001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
10030001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
10040001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
20000001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
20010001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
20020001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
20050001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
30000001
WPlease reduce the number of set
operations, and perform again.
The number of set operations exceeds
the maximum (20000).
30010001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
30020001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
40010001
EPlease contact HP Technical Support.An error occurred. If this problem
persists, please contact HP Technical
Support.
40060001
10 Message (part code group 0nnn)
To Next Page
Loading...
Need help?
General