Table 73 Error codes (part code 8510) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the settings.The maximum number of SSIDs that can
be registered will be registered except
the duplicate SSIDs.
590678510
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
associated with the CU are to be added
to this SLPR.
591018510
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
associated with the CU are to be deleted
from this SLPR.
591028510
WDelete unnecessary SSIDs from this SLPR,
and then retry the operation.
SSIDs that are associated with the
selected CU cannot be added to this
SLPR because too many SSIDs have been
set in the SLPR.
591108510
ECheck the settings.Ports in high-speed mode are set across
multiple SLPRs. If you perform this
operation, the user having access to
these SLPRs will become unable to use.
Do you want to continue this operation?
591148510
iClick [OK].Notice from Partition Definition:
Installation of Open System Array
Management is required to create more
than four CLPRs.
790008510
iClick [OK].Notice from Partition Definition:
Additional cache memory is required for
CLPR0 to create a CLPR.
790018510
iClick [OK].Notice from Partition Definition:
CLPR cannot be made any more.
790028510
Part code 8605
Table 74 Error codes (part code 8605)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
60128605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
60228605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
70608605
EConfirm the e-mail address or the server
address where the error occurred,
remove the invalid characters, then retry
the registration.
Invalid character is included in the e-mail
addresses or the server addresses.
657538605
Part code 8605 289