HP StorageWorks P9000 - Part Code 9107; Part Code 91 10

Table 80 Error codes (part code 9105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
ESpecify another security group name.The specified security group name has
already been used by another LDKC.
670029105
ESpecify another host group name.The specified host group name has
already been used by another LDKC.
670039105
ESpecify other LDEV group name.The specified LDEV Group name has
already been used by another LDKC.
670049105
Part code 9107
Table 81 Error codes (part code 9107)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EAn error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
60129107
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
70609107
EAn error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
71119107
Part code 9110
Table 82 Error codes (part code 9110)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WClick [OK], set data, and retry the
operation.
No data has been changed.51229110
WClick [OK], delete unnecessary hosts,
and retry the operation.
You cannot register any more hosts.56059110
WClick [OK], delete some of the registered
groups and make settings.
You cannot define any more groups.56109110
WClick [OK, then register another name.The specified name has already been
used.
56119110
WClick [OK], check the entered characters,
and register the name again.
The specified name includes some invalid
characters.
56129110
WClick [OK], check the registered hosts,
and retry the operation.
The specified host is included in another
group.
56139110
WClick [OK], check the registered LDEVs,
and retry the operation.
The specified LDEV is included in another
group.
56149110
WClick [OK], check the entered name, and
retry the operation.
The entered name is invalid.56159110
WClick [OK], check attributes of the
security group, and retry the operation.
Some attributes of the security group are
invalid.
56169110
Part code 9107 297