HP StorageWorks P9000 Manual

Part code 8510
Table 73 Error codes (part code 8510)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSpecify what you want to register, and
then retry the operation.
The displayed information has not been
changed.
50308510
EIf this problem persists, please contact
HP Technical Support.
An error occurred in the client logic.70608510
EIf this problem persists, please contact
HP Technical Support.
An error occurred in the client logic.73018510
EIf this problem persists, please contact
HP Technical Support.
An error occurred in the client logic.73028510
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
74408510
iTo cancel, click [OK].Do you want to cancel?91018510
iClick [OK] to execute the operation.Do you want to apply?91028510
WChange the CLPR name.The CLPR name already exists. The CLPR
name will return to the name that is
displayed before you have changed.
552358510
WChange the settings.The value set for the number of Cache
Residency areas is outside the valid
range. The value will return to the one
set before.
552368510
EPlease contact HP Technical Support.The SLPR name already exists. The SLPR
name will return to the name that is
displayed before you have changed.
552378510
EPlease contact HP Technical Support.Some of the selected ports cannot
migrate to the other SLPR. Please change
the settings.
552388510
EPlease contact HP Technical Support.Some of the selected parity groups
cannot migrate to the other SLPR. Please
change the settings.
552408510
WSelect another parity group, then retry
the operation.
The concatenated parity group cannot
be set across multiple CLPRs. Please
select another parity group, and then
retry the operation.
552618510
WApply the tentative settings with no parity
groups to the CLPR that you have
created, then migrate the parity group.
The Parity Group cannot be migrated to
the CLPR that you newly created. Please
apply the tentative settings with no parity
groups to the CLPR that you have
created, and then migrate the parity
group.
552628510
WMigrate all parity groups in the CLPR to
another CLPR, then delete the CLPR.
The CLPR that has some parity groups
cannot be deleted. Migrate all parity
groups in the CLPR to another CLPR, and
then delete the CLPR.
556368510
EIf you clicked [Yes], set the changes
again.
If you clicked [No], retry the operation.
If this problem persists, please contact
the system manager.
The partition configuration may contain
some inconsistent information.
To initialize partition configuration, select
the Yes button.
To stop the operation, select the No
button.
570018510
288 Message (part code group 8nnn)

HP StorageWorks P9000 Specifications

General

Brand	HP
Model	StorageWorks P9000
Category	Storage
Language	English