Table 51 Error codes (part code 6007) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60126007
WIf the same problem persists despite
retrying, please contact HP Technical
Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
60226007
WIf the same problem persists despite
retrying, please contact HP Technical
Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
60236007
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60246007
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60366007
EIf the problem persists despite retrying,
please contact HP Technical Support.
A time-out error occurred.80016007
Part code 6010
Table 52 Error codes (part code 6010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCorrect the specified contents, and retry.The Priority value is invalid. Specify the
correct value.
50106010
WCorrect the specified contents, and retry.The Range value is invalid. Specify the
correct value.
50116010
WCorrect the specified contents, and retry.The Error Level value is invalid. Specify
the correct value.
50126010
WCorrect the specified contents, and retry.The Fence value is invalid. Specify the
correct value.
50136010
WCorrect the specified contents, and retry.The Force value is invalid. Specify the
correct value.
50146010
WCorrect the specified contents, and retry.The R-VOL Write value is invalid. Specify
the correct value.
50156010
WCorrect the specified contents, and retry.The Split-r/Suspend kind value is invalid.
Specify the correct value.
50166010
WCorrect the specified contents, and retry.The Update value is invalid. Specify the
correct value.
50176010
WSpecify what you register, and retry.The displayed information has not been
changed.
50306010
WCorrect the specified contents, and retry.There are no RCUs in the CU. Please try
again after registering RCUs.
50346010
WCheck the condition for setting
parameter, and re-execute the setting.
The combination of parameters which
you specified is not permitted. Please
specify a valid combination of
parameters.
51316010
WCheck the contents, and retry.The Operation value is invalid. Specify
the correct value.
51376010
168 Message (part code group 6nnn)