Part code 03022
Table 33 Error codes (part code 03022)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).SSID cannot be allocated to all the LDEVs
with the specified initial SSID.
10513103022
WCheck the setting(s).Short of {0} LDEV ID(s).10513203022
WExecute refresh.The processing cannot continue due to
an internal logic contradiction.
10513303022
WExecute refresh.An unconfigured LDEV has been
selected.
10513403022
WCheck the setting(s).The selected LDEV has an LUN path
setting.
10513503022
WCheck the setting(s).The specified LDEV is a pool volume.10513603022
WCheck the setting(s).The selected LDEV has an LDEV Security
setting.
10513703022
WCheck the setting(s).The specified LDEV is a reserved volume
of Auto LUN.
10513803022
WCheck the setting(s).The selected LDEV has been set to a
LUSE volume.
10513903022
WCheck the setting(s).The specified LDEV is a remote command
device.
10514003022
WCheck the setting(s).The selected LDEV has been set as a
journal volume.
10514103022
WCheck the setting(s).The selected LDEV has been set as a
quorum disk volume.
10514203022
WCheck the setting(s).The selected LDEV has an access
attribute setting.
10514303022
WCheck the setting(s).An LDEV whose emulation type is
OPEN-L or OPEN-M is selected.
10514403022
WCheck the setting(s).An LDEV for FICON(R) Data Migration
is selected.
10514503022
WExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
The target LDEV is not associated with a
pool.
10514603022
WCheck the setting(s).The target LDEV is blocked.10514703022
WCheck the setting(s).The combo box is not selected.10514803022
EExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10514903022
WSpecify the subject to be operated.Select a table.10515003022
EExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10515103022
ECheck the setting(s).An LDEV in Normal or Quick Formatting
status is selected.
10515203022
WCheck the setting(s).The specified value is outside the range.10515303022
92 Message (part code group 3nnn)
To Next Page
Loading...
