Part code 0310
Table 17 Error codes (part code 0310)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCorrect the specified content, and retry.Specify 0 or above but below 256 in
each field.
50100310
WCorrect the specified content, and retry
the operation.
0 cannot be specified in all the fields or
the Class A field.
50110310
WReduce the number, and retry.The maximum number of IP Address is
32.
50400310
WReduce the number, and retry.The maximum number of Community
name is 32.
50410310
WCheck the content of the operation.This Community name is already in use.50500310
WCheck the content of the operation.This IP address is already in use.50510310
W-This item will be deleted. Do you want
to continue?
90600310
WCorrect the settings, then retry the
operation.
Specify a value between 0 to FFFF in
each field.
656840310
WCorrect the settings, then retry the
operation.
0 cannot be specified in all the fields.656850310
WCorrect the settings, then retry the
operation.
The OS being used does not support
Ipv6.
656860310
WCorrect the settings, then retry the
operation.
Specify a value between 0 to 256 in
each field for IPv4.
Specify a value between 0 to FFFF in
each field for IPv6.
656870310
iClick [Apply] and apply the setting
information, or [Cancel] and discard the
setting information, and retry the
operation.
The information being set has not been
applied to the device yet. Apply the
information to the device, then retry the
operation.
657100310
WClick [OK] to continue the operation.Test Trap will be sent to the registered
community. Do you want to continue the
operation?
690590310
iConfirm that the Trap has been received.Trap transmission completed. Please wait
for a while and check the reception of
the Trap.
690600310
Part code 0405
Table 18 Error codes (part code 0405)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50130405
WIf the same error occurs despite retrying,
please contact HP Technical Support.
An error occurred when installing or
removing the program product. Please
select the program product and select
[Detail] to check the details of the error.
50470405
Part code 0310 35
To Next Page
Loading...
