EasyManua.ls Logo

HP StorageWorks P9000 - Part Code 3305

HP StorageWorks P9000
333 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 37 Error codes (part code 03222) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).Zero is set in the size.10519503222
WCheck the setting(s).The size is not specified.10519603222
WCheck the setting(s).Other than the numerical value is set in
the size.
10519703222
WCheck the setting(s).The specified LDEV is not an THP volume.10519803222
WCheck the setting(s).The specified LDEV is not in the state of
zero data discarding.
10519903222
WCheck the setting(s).The specified LDEV is in the state of zero
data discarding.
10520003222
EExecute refresh.The specified LDEV does not exist in the
configuration.
10520103222
EExecute refresh.The status information of the specified
LDEV does not exist in the configuration.
10520203222
EExecute refresh.The detailed information of the pool that
is associated with the specified LDEV
does not exist in the configuration.
10520303222
EPlease decrease the number of selections
of volumes of the object or add the
capacity of the pool.
The selected volume cannot be enhanced
any further.
10521103222
Part code 3305
Table 38 Error codes (part code 3305)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
The SSIDs are not defined.10353305
WThe size of volume that can be set differs
by the type of emulation.
Check the setting range of each
emulation type, then change the size of
volume.
The size of the specified volume is
outside the setting range.
10363305
EThe error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
The free space remaining in the parity
group is not enough to install a
customized volume (CV).
10373305
EThe error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
The specified emulation type of the
customized volume (CV) is a type that
cannot be combined.
10383305
WCheck the setting.A path is defined to the specified
volume.
10393305
WCheck and correct the settings.The CU number and the LDEV number
set in the VLL operation are the same as
those of other volumes.
10413305
104 Message (part code group 3nnn)

Table of Contents

Other manuals for HP StorageWorks P9000

Related product manuals