1 P9500 messages and error codes
Unless otherwise specified, the term P9000 in this guide refers to the following disk array:
• P9500 Disk Array
The GUI illustrations in this guide were created using a Windows computer with the Internet Explorer
browser. Actual windows may differ depending on the operating system and browser used. GUI
contents also vary with licensed program products, storage system models, and firmware versions.
This chapter covers the messages and error codes generated by the storage system.
P9500 messages
“Sample message window 1” (page 6) and “Sample message window 2” (page 6) show
examples of typical message windows.
Figure 1 Sample message window 1
Figure 2 Sample message window 2
Message window format
Message level
There are four message levels:
Information
Warning
Fatal error
The server is unable to accept the request from Remote Web Console. One possible cause is
that another process is in progress at the server. This message does not indicate an error.
Message text
Message text is descriptive text that appears in the message window. It may include variables %s
(character string) and %d (numeral). The values of these variables are determined when processing
is performed.
Messages with a part code 60xx (where xx is a two-digit number) are Continuous Access
Synchronous Z or Continuous Access Synchronous messages. This manual contains Continuous
6 P9500 messages and error codes
To Next Page
Loading...
Need help?
General