EasyManua.ls Logo

HP StorageWorks P9000 - Part Code 20222

HP StorageWorks P9000
333 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 93 Error codes (part code 20123) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EYou cannot connect to the SVP because
of factors, such as a network error or
SVP error. Check the IP address. If the
IP address is correct, close the browser
(also close the browser of the storage
list), and log in again after waiting a
while. If the problem persists, please
contact HP Technical Support. The
version of Remote Web Console may not
match the version of destination SVP.
Clear the cache of JRE and the browser.
Restart the browser, and then retry the
processing. The Remote Web Console
is downloaded via the network and then
executed. If you use a proxy server, the
old version of the program may remain
in the cache of the proxy, and may be
downloaded and executed. If this
problem persists, contact your network
administrator. If your network does not
have any problem, and this problem
persists, please contact HP Technical
Support.
A network error occurred. The causes
might be one of the following.
The SVP was not ready.
An error occurred in the SVP.
A timeout error occurred while
communicating with the SVP.
10702820123
EIf the problem persists despite retrying,
please contact HP Technical Support.
An internal logic error occurred.10800020123
EIf the problem persists despite retrying,
please contact HP Technical Support.
An internal logic error occurred.10800120123
EIf the problem persists despite retrying,
please contact HP Technical Support.
An internal logic error occurred.10800220123
EIf the problem persists despite retrying,
please contact HP Technical Support.
An internal logic error occurred.10800320123
EClick [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
An error occurred in the disk storage
system.
The configuration may be inconsistent.
10800420123
Part code 20222
Table 94 Error codes (part code 20222)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect one or more table rows.The task for the operation is not selected.10500420222
WSelect another task which is in the state
of suspend. Or, check that you have the
permission to operate, then retry the
operation.
A task which is not in the state of
suspend is in the specified task. Or, you
have not a permission to operate the task
status.
10500520222
WSelect another task which is in the state
of waiting. Or, check that you have the
permission to operate, then retry the
operation.
A task which is not in the state of waiting
is in the specified task. Or, you have not
a permission to operate the task status.
10500620222
320 Message (part code group 20nnn)

Table of Contents

Other manuals for HP StorageWorks P9000

Related product manuals