HP StorageWorks P9000 Manual

Table 31 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WDelete the following pairs or volumes if
any, then retry the operation.
• Snapshot pairs
• Thin Provisioning volumes
Failed to delete the pool.
Pools cannot be deleted when they are
in the following status:
• Pairs of Snapshot are remaining.
• Volumes of Thin Provisioning are
remaining.
780623005
WRetry the operation after the formatting
is completed.
Failed to delete the pool.
Pools cannot be deleted when the pool
volumes of the specified pool is being
formatted.
780633005
WSpecify a pool volume, or, specify a pool
volume that is set to the specified pool,
then retry the operation.
Failed to delete the pool volume
because the specified pool volume had
one of the following problems.
• It is not a pool volume.
• The pool volume is not set to the
specified pool.
780643005
WCheck the LDEV ID of the pool volume,
then retry the operation.
The LDEV ID of the specified pool
volume is invalid.
780653005
WRestore the blocked pool VOLs.The maintenance operation cannot be
performed on the specified V-VOLs
because the V-VOLs include blocked
pool volumes.
780673005
EPlease contact HP Technical Support.The current microcode version does not
support the specified operation.
780753005
WSet the specified LDEV to OFFLINE.The operation cannot be done because
the specified V-VOL is online from an
EAV unsupported OS.
780763005
WRelease the Compatible XRC setting, and
then retry the operation.
The operation cannot be done because
the specified V-VOL is used for
Compatible XRC.
780773005
WRelease the Compatible FlashCopy
setting, and then retry the operation.
The operation cannot be done because
the specified V-VOL is used for
Compatible FlashCopy.
780783005
WVerify the pool VOLs to be set in the
specified pool.
An internal volume and an external
volume cannot be set as pool VOLs in
the specified pool.
781073005
Part code 3010
Table 32 Error codes (part code 3010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WReduce the number of Cache Residency
settings, then retry the operation.
The number of Cache Residency settings
has exceeded the maximum number of
available Cache Residency areas.
10463010
Part code 3010 91

HP StorageWorks P9000 Specifications

General

Brand	HP
Model	StorageWorks P9000
Category	Storage
Language	English