HP StorageWorks P9000 - Part Code 9210; Part Code 9605

Part code 9210
Table 84 Error codes (part code 9210)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
70609210
WIf this problem persists, please contact
HP Technical Support.
There is an invalid value in the Volume
Retention information.
74429210
WIf this problem persists, please contact
HP Technical Support.
The VTOC information contains one or
more invalid values.
74439210
WMount volumes, then retry the operation.There is no valid volume.81129210
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
91079210
Part code 9605
Table 85 Error codes (part code 9605)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50139605
WIssue a command again.No commands are issued.50309605
WDecrease the number of commands.The number of issued commands exceeds
the maximum.
50419605
WInstall Program Product.The program product is not installed.55119605
WReview LUs, and retry the operation.The number of requests for combining
LUs does not match the number of the
LUs.
58099605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60129605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60239605
EIf this problem persists, please contact
HP Technical Support.
The mistake is found in the set
parameter.
60389605
WWait a few minutes, then retry the
operation.
Processing in progress. Please wait for
a while, and then retry the operation.
65029605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
65339605
WCheck the error factor in the other
settings.
The setting process has not been
executed because there is no error in this
setting, but an error in the other settings.
65379605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
70609605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
71119605
302 Message (part code group 9nnn)