Table 93 Error codes (part code 20123) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
ECheck the internet protocol (IP) address.
If the IP address is correct, terminate the
browser (also terminate the storage list
browser), then log it in again.
A network error occurred. It is not
possible to connect with the SVP due to
one of the following reasons.
• The SVP was not ready.
• An error occurred in the SVP.
10701620123
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
10701720123
ELog in again.A network error occurred. It is not
possible to connect with the SVP because
a timeout error occurred while
communicating with the SVP.
10701820123
EIf this problem persists, please contact
HP Technical Support.
Failed to restore the user account list file.10701920123
WInstall a supported version of JRE, then
retry the operation.
An unsupported version of JRE is used.10702020123
ERefresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
An internal logic error occurred.10702120123
ERefresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
An internal logic error occurred.10702220123
EClick [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
An internal logic error occurred.10702320123
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
The content of a task to be registered
conflicts with that of another that has
already been registered. Retry the
operation.
10702420123
WWait for a while, then retry the
operation.
The operation failed, because the
configuration information was being
changed.
10702520123
WWait, then retry the refreshing operation.The operation failed because the storage
system performed refreshing internally.
10702620123
WWait, then retry the refreshing operation.The refreshing operation was not
completed because the configuration
was changing.
10702720123
Part code 20123 319