Table 82 Error codes (part code 9110) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WClick [OK], check attributes of the
security group, and retry the operation.
Attributes of the security group differ
from the attributes of other related
security groups.
56179110
WClick [OK], check the current settings,
and retry the operation.
The target logical device has already
been defined to another security group.
Also, the security group contains the
same host in the target security group.
56189110
WClick [OK]. Ensure that the R-VOL/T-VOL
is not set to the specified security group,
and retry the operation.
The R-VOL/T-VOL cannot be set to the
specified security group.
56199110
WClick [OK], check the selected volumes,
and retry the operation.
The selected volumes include some
invalid volumes.
56209110
WClick [OK], select an item, and retry the
operation.
No item is selected. Please select an
item.
56219110
WClick [OK], select only one line, and retry
the operation.
If you want to continue this operation,
please select only one line.
56229110
iTo continue processing, click [OK].
Otherwise, click [Cancel].
The data has been changed. If you select
another tab (page), the settings will be
discarded. Are you sure you want to
continue?
56239110
WCheck the settings, then retry.The host you are registering is already
registered in a host group to which ports
have already been set.
58169110
WCheck the settings, then retry.You are registering a host that is already
registered in another host group. Also,
you are registering the host in a host
group to which ports have already been
set.
58179110
WCheck the settings, then retry.Ports cannot be set because a host
registered in the specified host group is
included in another host group.
58189110
EPlease contact HP Technical Support.An error occurred. If this problem
persists, please contact HP Technical
Support.
70609110
EIf this problem persists, please contact
HP Technical Support.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
74409110
EInstall PCBs for the mainframe computers,
then retry the operation.
There is no CHA PCB for mainframe
computers.
81119110
WPlease mount volumes, then retry the
operation.
There is no valid volume.81129110
iTo delete the item, click [Yes]. Otherwise,
click [No].
Are you sure you want to delete the
item?
90819110
iTo delete the host, click [Yes]. Otherwise,
click [No].
Are you sure you want to delete the
selected host which was added by the
user?
90829110
iTo delete the group, click [Yes].
Otherwise, click [No].
The specified group is registered in the
security group. Are you sure you want
to delete the group?
90839110
298 Message (part code group 9nnn)
To Next Page
Loading...
