Table 1 Error codes (part code 0001) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EPlease contact HP Technical Support.An error occurred. If this problem
persists, please contact HP Technical
Support.
40070001
EPlease contact HP Technical Support.An error occurred. If this problem
persists, please contact HP Technical
Support.
40080001
EPlease contact HP Technical Support.An error occurred. If this problem
persists, please contact HP Technical
Support.
40090001
EThe error occurs only in the internal
process.
An error occurred. If this problem
persists, please contact HP Technical
Support.
40100001
WLog on again.
A network error may occur when the
load of another application program
working on the same PC with Remote
Web Console is high.
Increase the value of the RMI time-out
period when network error occurs.
A network error occurred. The probable
cause is:
A timeout error occurred during
communication with the SVP.
40110001
ELog on again after a while.The number of clients logged on to the
RMI server has exceeded 32.
40120001
EFailed to access the Config file. Please
contact HP Technical Support.
The server configuration is invalid. Please
contact HP Technical Support.
40130001
WLock is removed. Lock again.Network error detected; exclusive lock
is released.
40200001
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
50130001
WEnter a correct user name or a password.The user name or the password is
invalid.
50140001
WIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
50750001
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
50990001
WLog in with a different user name. Or,
there is a possibility that the previous
termination process might be invalid
(terminated by clicking the end button of
the browser). In this case, log in again
after the RMI Time-out (default 1 min.).
The specified user name is already
logged in, or the previous logon was not
properly terminated.
51320001
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
53000001
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
53010001
Part code 0001 11