HP StorageWorks P9000

Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WReduce the number of requests to be
processed at one time. Then retry the
operation.
Too many requests. Please reduce the
number of requests to be processed at
one time. After that, please retry the
operation.
580646505
WCheck the specified LDEV number.Invalid parameter (LDEV number).580656505
WCheck the specified journal number.Invalid parameter (Journal number).580666505
WCheck the specified mirror ID.Invalid parameter (Mirror ID).580676505
WCheck the specified JNL Control
parameter.
Invalid parameter (Journal Control).580686505
WCheck the specified Suspend Condition
parameter.
Invalid parameter (Suspend
Condition-Journal Full).
580696505
WCheck the specified Suspend Condition
parameter.
Invalid parameter (Suspend
Condition-Master Journal Failure).
580706505
WCheck the specified Suspend Condition
parameter.
Invalid parameter (Suspend
Condition-Restore Journal Failure).
580716505
WThe current configuration of the storage
systems and the current status of lines
connecting the storage systems may not
satisfy the operating conditions. Check
the configuration of the storage systems
and the status of lines connecting the
storage systems, then check whether the
status of the Remote Copy pair is
changed.
The pair status has not changed yet.
Check the configuration of the
subsystems and the status of lines
connecting the subsystems, and then
check whether the status of the Remote
Copy pair is changed.
580726505
WIf the same error occurs despite retrying,
please contact HP Technical Support.
The subsystem is busy. Wait for a while,
and then retry the operation.
580736505
WCheck the specified serial number.The specified serial number is incorrect.580756505
WCheck the status of the specified volume.The specified volume does not exist or
is unusable.
580786505
WCheck the status of the specified primary
data volume in the Volume Retention
window or the Data Retention window.
The specified primary data volume
cannot be used as an S-VOL (secondary
volume) because of Volume Retention
settings or Data Retention settings.
580796505
WCheck the status of the specified primary
data volume.
A Concurrent Copy operation is in
progress on the specified primary data
volume.
580806505
WCheck the status of the specified volume
in the Volume Security for Mainframe
window.
The specified primary data volume
belongs to an access group or a pool
group of Volume Security for Mainframe.
580816505
WCheck the consistency group status in the
Continuous Access Journal window of
the local and the remote storage systems.
The specified consistency group is
already used.
580826505
WCheck the status of the specified master
journal.
The specified master journal is not
registered.
580836505
WCheck the status of the specified primary
data volume.
The specified primary data volumes
cannot be paired with another volume,
because the primary data volume is used
as a journal volume.
580846505
186 Message (part code group 6nnn)