HP StorageWorks P9000

Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck whether the specified secondary
data volume is used by the following
program products.
• Business Copy/Snapshot
• Continuous Access Synchronous
• External Storage Access Manager
• Auto LUN
The specified secondary data volume is
used by one of the following program
products.
• Business Copy/Snapshot
• Continuous Access Synchronous
• External Storage Access Manager
• Auto LUN
583556505
WIf the problem persists despite retrying,
please contact HP Technical Support.
The disk subsystem is in internal process.
Please retry the operation.
584516505
WFrom the Compatible FlashCopy
window, check the status of the specified
primary data volume.
The Add Pair operation or the Resume
Pair operation failed because the
specified primary data volume was a
T-VOL of Compatible FlashCopy.
584566505
WSpecify a mirror ID other than 0, then
retry the operation.
Continuous Access Synchronous, External
Storage Access Manager, or Continuous
Access Synchronous Z is using the
specified primary data volume. Specify
a mirror ID other than 0 if you use this
volume to create a pair.
584576505
WSpecify the same mirror ID as the
registered mirror ID, then retry the
operation.
A different mirror ID has already been
registered in the specified master journal.
Specify the same mirror ID, because only
one mirror ID can be registered in one
journal.
584586505
WFrom the Compatible FlashCopy
window, check the status of the specified
secondary data volume.
The Add Pair operation or the Resume
Pair operation failed because the
specified secondary data volume was
used by Compatible FlashCopy.
584596505
WConfirm the state of the specified primary
data in the Snapshot window.
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was one of the following:
• the specified volume was a P-VOL of
Snapshot and was in Reverse Copy
status.
• the specified volume was an S-VOL
of Snapshot.
584856505
WCheck the state of the specified primary
data volume.
The Paircreate operation failed because
the specified primary data volume was
a V-VOL for Snapshot.
584866505
WConfirm the status of the specified
primary data volume.
The Paircreate operation failed because
the specified primary data volume was
a Pool-VOL.
584876505
Part code 6505 195