Table 100 Error codes (part code 20705) (continued)
Severity LevelRecommended ActionError MessageError NumberPart Code
WReduce the number of resources to
be specified, and then retry the
operation.
The specified number of resources has
reached the upper limit.
7610720705
WExclude the duplicated setting, and
then retry the operation.
The specified resource has already
been specified.
7611020705
WExclude the duplicated setting, and
then retry the operation.
The specified resource has already
been specified.
7611320705
WExclude the duplicated setting, and
then retry the operation.
The specified resource has already
been specified.
7611520705
WExclude the duplicated setting, and
then retry the operation.
The specified resource has already
been specified.
7611720705
WSpecify all LDEVs if you want to
migrate LDEVs that belong to a
Pool-VOL.
The specified LDEVs cannot be
migrated because they are a part of
a Pool-VOL.
7611820705
WSpecify all LDEVs if you want to
migrate LDEVs that belong to a
LUSE VOL.
The specified LDEVs cannot be
migrated because they are a part of
a LUSE VOL.
7611920705
WSpecify all LDEVs if you want to
migrate LDEVs that belong to a
journal group.
The specified LDEVs cannot be
migrated because they are a part of
a journal group.
7612120705
WSpecify all parity groups if you
want to migrate parity groups
registered in a RAID Group.
The specified parity groups cannot be
migrated because they are registered
as a part of a RAID Group.
7612220705
WCorrect the setting to migrate
resources from one resource
group, and then retry the
operation.
Migration of resources from more than
one resource group cannot be done.
7612320705
WSpecify another resource group
name.
The default resource group name
cannot be used.
7710120705
WExclude the duplicated setting, and
then retry the operation.
The specified resource group name
has already been specified.
7710220705
WRefresh the window, and then retry
the operation.
If the problem persists, please
contact HP Technical Support.
The specified resource group does not
exist in the configuration.
7710320705
WRelease all resources in the
specified resource group, and then
retry the operation.
A resource group cannot be deleted
because resources are included in the
specified resource group.
7710420705
WAdjust the number of resource
groups to be within the range of
1 to 1024, and then retry the
operation.
A resource group is not specified or
the number of resource groups that
can be specified at a time exceeds the
maximum.
7710620705
WChange the virtualization setting
of the resource group to Disabled.
Resources cannot be migrated
because the virtualization setting of a
resource group is enabled.
7710820705
Part code 20705 325
To Next Page
Loading...
