HP StorageWorks SN6000 Command Line Interface Guide

118 Simple Network Management Protocol Configuration
Displaying SNMP information
To display common and trap-specific SNMP configuration information, enter the show setup snmp
command, as shown in the following example. See Table 50 for a description of the SNMP parameters.
SN6000 FC Switch #> show setup snmp
SNMP Information
----------------
SNMPEnabled True
Contact <sysContact undefined>
Location N_107 System Test Lab
Description HP StorageWorks SN6000 Stackable Dual Power Supply Fibre
Channel Switch
ObjectID 1.3.6.1.4.1.3873.1.25
AuthFailureTrap True
ProxyEnabled True
SNMPv3Enabled False
Trap1Enabled False
Trap1Address 10.0.0.254
Trap1Port 162
Trap1Severity warning
Trap1Version 2
Trap2Enabled False
Trap2Address 0.0.0.0
Trap2Port 162
Trap2Severity warning
Trap2Version 2
Trap3Enabled False
Trap3Address 0.0.0.0
Trap3Port 162
Trap3Severity warning
Trap3Version 2
Trap4Enabled False
Trap4Address 0.0.0.0
Trap4Port 162
Trap4Severity warning
Trap4Version 2
Trap5Enabled False
Trap5Address 0.0.0.0
Trap5Port 162
Trap5Severity warning
Trap5Version 2

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English