HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 73
To display the zones and the zone sets to which they belong, enter the zone list command, as shown
in the following example:
SN6000 FC Switch #> zone list
Zone ZoneSet
---- -------
wwn_b0241f
zone_set_1
wwn_23bd31
zone_set_1
wwn_221416
zone_set_2
wwn_2215c3
zone_set_2
wwn_0160ed
zone_set_3
To display the zone sets for which a specified zone is a member, enter the zone zonesets command, as
shown in the following example:
SN6000 FC Switch #> zone zonesets zone1
Current List of ZoneSets for Zone: zone1
----------------------------------
zone_set_1
Zone membership information
To display the members for a specified zone, enter the zone members command, as shown in the
following example:
SN6000 FC Switch #> zone members wwn_b0241f
Current List of Members for Zone: wwn_b0241f
---------------------------------
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
Orphan zone information
To display a list of zones that are not members of any zone set, enter the zone orphans command, as
shown in the following example:
SN6000 FC Switch #> zone orphans
Current list of orphan zones
----------------------------
zone3
zone4
To Next Page
Loading...
Need help?
General