HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 273
show steering
Description Displays the routes that data takes in the fabric.
Authority None
Syntax
show steering [domain_id]
Operands
[domain_id]
The domain ID for which to display route information. If you omit [domain_id], the system displays
routes for all switches in the fabric.
Examples The following is an example of the show steering command:
SN6000 FC Switch #> show steering 35
DomainID DefaultOutPort InPort OutPort
-------- -------------- ------ -------
35 18 3 16/18/16/18
5 18/16/18/16
6 16/18/16/18
7 16/18/16/18
15 18/16/18/16
To Next Page
Loading...
Need help?
General