272 Command Reference
The following is an example of the show setup system ipv4 command:
SN6000 FC Switch #> show setup system ipv4
System Information
------------------
EthIPv4NetworkEnable True
EthIPv4NetworkDiscovery Static
EthIPv4NetworkAddress 10.20.11.32
EthIPv4NetworkMask 255.255.252.0
EthIPv4GatewayAddress 10.20.8.254
The following is an example of the show setup system ipv6 command:
SN6000 FC Switch #> show setup system ipv6
System Information
------------------
EthIPv6NetworkEnable False
EthIPv6NetworkDiscovery Static
EthIPv6NetworkAddress 2001::1/64
EthIPv6GatewayAddress fe80::1
The following example of the show setup system logging command:
SN6000 FC Switch #> show setup system logging
System Information
------------------
LocalLogEnabled True
RemoteLogEnabled False
RemoteLogHostAddress 10.0.0.254
The following is an example of the show setup system ntp command:
SN6000 FC Switch #> show setup system ntp
System Information
------------------
NTPClientEnabled False
NTPServerDiscovery Static
NTPServerAddress 51.68.85.102
The following example of the show setup system timers command:
SN6000 FC Switch #> show setup system timers
System Information
------------------
AdminTimeout 30
InactivityTimeout 0
See also set setup system, page 222
To Next Page
Loading...
Need help?
General