HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 95
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name g1
Group Type ISL
Group Member 10:00:00:c0:dd:00:90:a3
Authentication (None / Chap) [None] chap
PrimaryHash (MD5 / SHA-1) [MD5 ] sha-1
PrimarySecret (40 hex or 20 ASCII char value) [ ] 12345678901234567890
SecondaryHash (MD5 / SHA-1 / None) [None] md5
SecondarySecret (32 hex or 16 ASCII char value) [ ] 1234567890123456
Binding (domain ID 1-239, 0=None) [3 ]
Finished configuring attributes.
To discard this configuration use the security cancel command.
Removing members from a group
To remove a member from a group, enter the group remove command, as shown in the following
example:
SN6000 FC Switch (admin-security) #> group remove group_1 10:00:00:c0:dd:00:90:a3
To Next Page
Loading...
Need help?
General