EasyManuals Logo

HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000
330 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #250 background imageLoading...
Page #250 background image
250 Command Reference
Table 61 Event log display filter parameters
Parameter Description
Info Displays all informative events
Warning Displays all warning events
Critical Displays all critical events
Eport Displays all events related to E_Ports
Mgmtserver Displays all events related to the management server
Nameserver Displays all events related to the name server
Port [port_number] Displays all events related to the port given by [port_number]
Snmp Displays all events related to SNMP
Switch Displays all events related to switch management
Zoning Displays all events related to zoning
level
Displays the severity level settings for event logging setting and the setting for the display level.
options
Displays the options that are available for configuring event logging and automatic display to the
screen. For information about how to configure event logging and display level, see the
set log command.
port
Displays the ports being monitored for events. If an event occurs which is of the defined level and
on a defined component, but is not on a defined port, no entry is made in the log.
settings
Displays the current filter settings for component, severity level, port, and display level. This
command is equivalent to executing the following commands separately:
show log component, show log level, and show log port.
Examples The following is an example of the show log component command:
SN6000 FC Switch #> show log component
Current settings for log
------------------------
FilterComponent NameServer MgmtServer Zoning Switch Blade Port Eport Snmp
The following is an example of the show log level command:
SN6000 FC Switch #> show log level
Current settings for log
------------------------
FilterLevel Info
DisplayLevel Critical
The following is an example of the show log options command:
SN6000 FC Switch #> show log options
Allowed options for log
-----------------------
FilterComponent
All,None,NameServer,MgmtServer,Zoning,Switch,Blade,Port,Eport,Snmp,CLI,Qfs
FilterLevel Critical,Warn,Info,None
DisplayLevel Critical,Warn,Info,None

Table of Contents

Other manuals for HP StorageWorks SN6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StorageWorks SN6000 and is the answer not in the manual?

HP StorageWorks SN6000 Specifications

General IconGeneral
BrandHP
ModelStorageWorks SN6000
CategorySwitch
LanguageEnglish

Related product manuals