HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 239
show config security portbinding
Description Displays the port binding configuration for one or more ports.
Authority None
Syntax
show config security portbinding [port_number]
Operands
[port_number]
The number of the port. If you omit [port_number], the port binding configuration for all ports is
displayed.
Examples The following is an example of the show config security port command:
SN6000 FC Switch #> show config security portbinding
Configuration Name: default
-------------------
Port Binding Status WWN
---- -------------- -----------------------
0 True 10:20:30:40:50:60:70:80
1 True 10:20:30:40:50:60:70:80
2 False No port binding entries found.
3 True 10:20:30:40:50:60:70:80
4 True 10:20:30:40:50:60:70:80
5 False No port binding entries found.
6 True 10:20:30:40:50:60:70:81
7 False No port binding entries found.
8 True 10:20:30:40:50:60:70:80
9 False No port binding entries found.
10 False No port binding entries found.
11 False No port binding entries found.
12 False No port binding entries found.
13 False No port binding entries found.
14 False No port binding entries found.
15 False No port binding entries found.
16 False No port binding entries found.
17 False No port binding entries found.
18 False No port binding entries found.
19 False No port binding entries found.
20 False No port binding entries found.
21 False No port binding entries found.
22 False No port binding entries found.
23 False No port binding entries found.
See also set config security portbinding, page 200

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English