HP StorageWorks SN6000

280 Command Reference
show topology
Description Displays all connected devices.
Authority None
Syntax
show topology [port_number]
Operands
[port_number]
Displays the devices connected to the port given by [port_number].
Examples The following is an example of the show topology command:
SN6000 FC Switch #> show topology
Unique ID Key
-------------
A = ALPA, D = Domain ID, P = Port ID
Port Local Local Remote Remote Unique
Number Type PortWWN Type NodeWWN ID
------ ----- ------- ------ ------- ------
5 F 20:05:00:c0:dd:00:bd:ec N 20:00:00:00:c9:22:1e:93 010500 P
10 E 20:0a:00:c0:dd:00:bd:ec E 10:00:00:c0:dd:00:80:21 4(0x4) D
The following is an example of the show topology command for port 1:
SN6000 FC Switch #> show topology 1
Local Link Information
----------------------
PortNumber 1
PortID 650100
PortWWN 20:01:00:c0:dd:00:91:11
PortType F
Remote Link Information
-----------------------
Device 0
NodeWWN 50:80:02:00:00:06:d5:38
PortType NL
Description (NULL)
IPv4Address 0.0.0.0
IPv6Address fc00:1234:5678:9abc:def0:1234:5678:9abc
Device 1
NodeWWN 20:00:00:20:37:2b:08:c9
PortType NL
Description (NULL)
IPv4Address 0.0.0.0
IPv6Address fc00:1234:5678:9abc:def0:1234:5678:9efg