HP StorageWorks SN6000

238 Command Reference
show config security
Description Displays the security database configuration parameters.
Authority None
Syntax
show config security
Examples The following is an example of the show config security command:
SN6000 FC Switch #> show config security
Configuration Name: default
-------------------
Switch Security Configuration Information
-----------------------------------------
FabricBindingEnabled False
AutoSave True
Port Binding Status WWN
---- -------------- ---
0 True 10:20:30:40:50:60:70:80
1 True 10:20:30:40:50:60:70:80
2 False No port binding entries found.
3 True 10:20:30:40:50:60:70:80
4 True 10:20:30:40:50:60:70:80
5 False No port binding entries found.
6 True 10:20:30:40:50:60:70:81
7 False No port binding entries found.
8 True 10:20:30:40:50:60:70:80
9 False No port binding entries found.
10 False No port binding entries found.
11 False No port binding entries found.
12 False No port binding entries found.
13 False No port binding entries found.
14 False No port binding entries found.
15 False No port binding entries found.
16 False No port binding entries found.
17 False No port binding entries found.
18 False No port binding entries found.
19 False No port binding entries found.
20 False No port binding entries found.
21 False No port binding entries found.
22 False No port binding entries found.
23 False No port binding entries found.
See also set config security, page 199