HP StorageWorks SN6000 Command Line Interface Guide

176 Command Reference
RecipientMail Addresses to send email messages to; maximum of 10 addresses. The
address format is account@domain.
CaptureEnabled Enables (True) or disables (False) the data capture configuration only
when creating the Tech_Support_Center profile. The default is False. For
more information about the data capture configuration, see the ”capture”
command.
Table 15 Profile configuration parameters (continued)
Parameter Description
Operands
delete [profile]
Deletes the specified profile given by [profile] from the Call Home database. You must enter the
callhome save command to save your changes.
edit [profile]
Opens an edit session in which to change the configuration of an existing profile given by
[profile]. The Tech_Support_Center profile can be edited. For descriptions of the profile
parameters, see Table 15. The CaptureEnabled parameter is displayed only when modifying
the Tech_Support_Center profile.
rename [profile_old] [profile_new]
Renames the profile given by [profile_old] to the profile given by [profile_new]. You must enter the
callhome save command to save your changes.
Examples The following is an example of the profile create command:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> callhome edit
SN6000 FC Switch (admin-callhome) #> profile create profile_1
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press ’q’ or ’Q’ and the ENTER key to do so.
Default Values:
Level Alarm
Format FullText
MaxSize 100000
EmailSubject <undefined>
RecipientEmail (up to 10 entries allowed)
New Value (press ENTER to accept default value, 'q' to quit):
Level (Alarm,Critical,Warn,None) :
Format (1=FullText, 2=ShortText) :
MaxSize (decimal value, 650-2000000) :
EmailSubject (string, max=64 chars, N=None) : Technical problem
RecipientEmail (ex: admin@company.com, N=None)
1. <undefined> : admin0@company.com
The profile has been created.
This configuration must be saved with the callhome save command
before it can take effect, or to discard this configuration
use the callhome cancel command.
SN6000 FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English