HP StorageWorks SN6000 Command Line Interface Guide

212 Command Reference
Notes • The Callhome service must be active to support Call Home email notification. See the
set setup services command.
• The primary, secondary, or both SMTP servers must be properly addressed and enabled on the
switch to activate Call Home email notification. If both SMTP servers are enabled, the primary
server is active.
• The switch will reroute Call Home email messages to the secondary SMTP server if the primary
should become unavailable. Primary and secondary identities do not change upon transfer of
control.
• Callhome profiles determine the events, conditions, and email recipients of Call Home email
messages. For information about creating Call Home profiles, see the profile command.
Examples The following is an example of the set setup callhome command:
SN6000 FC Switch (admin) #> set setup callhome
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the current value. If you
wish to terminate this process before reaching the end of the list press 'q'
or 'Q' and the ENTER key to do so.
If either the Primary or Secondary SMTP Servers are enabled, the
FromEmailAddress attribute must be configured or the switch will not attempt
to deliver messages.
Current Values:
PrimarySMTPServerAddr 0.0.0.0
PrimarySMTPServerPort 25
PrimarySMTPServerEnable False
SecondarySMTPServerAddr 0.0.0.0
SecondarySMTPServerPort 25
SecondarySMTPServerEnable False
ContactEmailAddress nobody@localhost.localdomain
PhoneNumber <undefined>
StreetAddress <undefined>
FromEmailAddress nobody@localhost.localdomain
ReplyToEmailAddress nobody@localhost.localdomain
ThrottleDupsEnabled True
New Value (press ENTER to accept current value, 'q' to quit):
PrimarySMTPServerAddr (hostname, IPv4, or IPv6 Address):
PrimarySMTPServerPort (decimal value) :
PrimarySMTPServerEnable (True / False) :
SecondarySMTPServerAddr (hostname, IPv4, or IPv6 Address):
SecondarySMTPServerPort (decimal value) :
SecondarySMTPServerEanble (True / False) :
ContactEmailAddress (ex: admin@company.com) :
PhoneNumber (ex: +1-800-123-4567) :
StreetAddress (include all address info) :
FromEmailAddress (ex: bldg3@company.com) :
ReplyToEmailAddress (ex: admin3@company.com) :
ThrottleDupsEnabled (True / False) :
Do you want to save and activate this Callhome setup? (y/n):
See also callhome, page 129
profile, page 175
set setup services, page 216

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English