264 Command Reference
Examples The following is an example of the show port command:
SN6000 FC Switch #> show port 1
Port Number: 1
------------
AdminState Online OperationalState Offline
AsicNumber 0 PerfTuningMode Normal
AsicPort 2 PortID 3a0100
ConfigType GL PortWWN 20:01:00:c0:dd:0d:4f:08
POSTFaultCode 00000000 RunningType Unknown
POSTStatus Passed MediaPartNumber FTLF8528P2BCV
DownstreamISL False MediaRevision A
EpConnState None MediaType 800-MX-SN-S
EpIsoReason NotApplicable MediaVendor FINISAR CORP.
IOStreamGuard Disabled MediaVendorID 00009065
Licensed True SymbolicName Port1
LinkSpeed Auto SyncStatus SyncLost
LinkState Inactive TestFaultCode 00000000
LoginStatus NotLoggedIn TestStatus NeverRun
MaxCredit 16 UpstreamISL False
MediaSpeeds 2Gb/s, 4Gb/s, 8Gb/s XmitterEnabled True
ALInit 1 LIP_F8_F7 0
ALInitError 0 LinkFailures 0
BadFrames 0 Login 0
BBCR_FrameFailures 0 Logout 0
BBCR_RRDYFailures 0 LongFramesIn 0
Class2FramesIn 0 LoopTimeouts 0
Class2FramesOut 0 LossOfSync 0
Class2WordsIn 0 LostFrames 0
Class2WordsOut 0 LostRRDYs 0
Class3FramesIn 0 PrimSeqErrors 0
Class3FramesOut 0 RxLinkResets 0
Class3Toss 0 RxOfflineSeq 0
Class3WordsIn 0 ShortFramesIn 0
Class3WordsOut 0 TotalErrors 0
DecodeErrors 0 TotalLinkResets 0
EpConnects 0 TotalLIPsRecvd 0
FBusy 0 TotalLIPsXmitd 2
FlowErrors 0 TotalOfflineSeq 0
FReject 0 TotalRxFrames 0
InvalidCRC 0 TotalRxWords 0
InvalidDestAddr 0 TotalTxFrames 0
LIP_AL_PD_AL_PS 0 TotalTxWords 0
LIP_F7_AL_PS 0 TxLinkResets 0
LIP_F7_F7 0 TxOfflineSeq 0
LIP_F8_AL_PS 0
See also set port, page 210
To Next Page
Loading...
Need help?
General