HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 275
Examples The following is an example of the show switch command:
SN6000 FC Switch #> show switch
Switch Information
------------------
SymbolicName SN6000 FC Switch
SwitchWWN 10:00:00:c0:dd:00:bc:56
BootVersion Vx.x.x.x-0 (day month date time year)
CreditPool 0
DomainID 19 (0x13)
FirstPortAddress 130000
FlashSize - MBytes 128
LogFilterLevel Critical
MaxPorts 20
NumberOfResets 15
ReasonForLastReset PowerUp
ActiveImageVersion - build date Vx.x.x.0 (day month date time year)
PendingImageVersion - build date Vx.x.x.0 (day month date time year)
ActiveConfiguration default
AdminState Online
AdminModeActive False
BeaconOnStatus Off
OperationalState Online
PrincipalSwitchRole False
POSTFaultCode 00000000
POSTStatus Passed
TestFaultCode 00000000
TestStatus NeverRun
BoardTemp (1) - Degrees Celsius 32
SwitchTemperatureStatus Normal
See also set config switch, page 201
set switch state, page 229

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English