HP StorageWorks SN6000 Command Line Interface Guide

70 Zoning Configuration
To display all zone sets, zones, and zone members in the active zone set and configured zone sets, enter
the zoning list command, as shown in the following example. Merged and edited zone sets are
displayed if they exist.
SN6000 FC Switch #> zoning list
Active (enforced) ZoneSet Information
ZoneSet Zone ZoneMember
--------------------------------
wwn
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:c3
Configured (saved in NVRAM) Zoning Information
ZoneSet Zone ZoneMember
--------------------------------
wwn
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:16

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English