• Disk drive free space — Disk capacity including log files and setup files are required because
log files and setup files are not included.
NOTE: Depending on the specified log file size and the number of generations, a very
large amount of disk space may be required. Logs cannot be output when a disk has no free
space.
◦ 4 gigabytes or more if using the default log file size and number of generations
◦ 152 gigabytes or more if the log file size and the number of generations are set to
maximum
Formula for calculating the required disk size [GB]:
Disk size [GB] = (6 x specified log file size [MB] x (number of generations +1) +1,585 ) ÷
1024
NOTE: The log file size and the number of generations can be specified by using the
maintenance configuration files. For details, see “Maintenance configuration files” (page 42)
and “Generation management of log files” (page 65).
• Display — Required for the GUI tool
Screen resolution – 1024 x 768 pixels or more◦
◦ Screen color – 24 bits or more
• Supported HBA — What the OS permits
20 Environmental Prerequisites
To Next Page
Loading...
