To Next Page

To Previous Page

Setup files

Edit the setup files on the application server and backup server as needed.

Edit the files with a text editor using single-byte alphanumeric characters (SJIS code set). End

each line with a line feed.

Edit each item according to the backup needs of the user. Items which include brackets ([ ]) in

the list must be enclosed in single-byte brackets.

RemarksItemDisk array system

(Missing number)(Missing number)(Missing number)

Setup file entries, description, and formatting:

• Comment — For entering comments.

In the following cases, everything from "#" to the end of line is ignored as a comment:

◦ When there is "#" at the start of the line

◦ When there is "#" in the line; and

all blank spaces before “#”–

– IP address before “#”

◦ Formatting examples:

– #Comment One

– #Comment Two

– #Comment Three

– #Comment Four

– #Comment Five

• Lines consisting of only spaces or line feeds — Enter blank or line feeds when needed.

• Log output level — Specify the log output level for the log file.

You can change the log output level with the value of <level>.

See for the log output level to specify. NORMAL is the recommended value.

Formatting examples for [DebugLevel=<level>]:

◦ [DebugLevel=MINIMAL]

◦ [DebugLevel=NORMAL]

◦ [DebugLevel=VERBOSE]

◦ Blank (no entry)

• Default backup mode — When a backup mode is not specified by requester, specify the

backup mode by default. If neither specified from this item nor GUI tool, the default backup

mode adopts Business Copy.

Formatting:

◦ [DefaultBackupMode=BusinessCopy]

◦ [DefaultBackupMode=Snapshot]

38 Configuration Procedure

HP XP User Manual

Questions and Answers: