Installation of other VSS Provider
Installation of following other VSS Providers at the same time is not supported.
• HPE Storage VSS Hardware Providers
• Hitachi Storage Adapter for Microsoft Volume ShadowCopy Service
Account Authentication
Select Administrator (View and Modify) from the role check box in the Storage Management
Software account addition window.
For the characters and can be used for user name and password as well as the number of
characters can be entered, refer to the RAID Manager command reference.
RAID Manager (HORCM)
• Start RAID Manager (HORCM) prior to starting any RAID Manager commands from VSS
Provider.
See “Preparing configuration files and restarting RAID Manager (HORCM)” (page 43) for
details.
• In the case of the Ext Stor configuration or HA configuration, do not describe HORCM_VCMD
in the HORCM CONF configuration file.
• Do not use the HORCM CONF configuration file used by VSS Provider except for the purpose
of VSS Provider.
Host group creation
Host groups must be created in disk array systems, see Table 7 (page 46).
Creating a user authentication account for storage administration
The disk array system must have the same user name and password when using multiple disk
array systems of the XP P9500/XP7.
For example:
When using disk array system A or B, the same user name (USER01) and password (*****) must
be used.
• Storage A:
User name — USER01◦
◦ Password — *****
• Storage B:
User name — USER01◦
◦ Password — *****
28 Environmental Prerequisites
To Next Page
Loading...
Need help?
General
