Recommended action
Perform the following using Storage Management Software:
• (1) Delete any Business Copy pairs which are not used when the number of Business Copy
pairs has reached the maximum.
• (2) Delete any S-VOLs which are not used when the number of S-VOLs for P-VOL has
reached the maximum.
E10000F7
Message
Creation of S-Vol failed. The specified RaidGroup is not valid. Creation of S-VOL failed.
Explanation
Creation of S-Vol failed. The specified RaidGroup is not valid. Creation of S-VOL failed.
Recommended action
The specified Raid/ParityGroup is not valid. The specified RAID/Parity group is not valid. See
“About errors attributable to disk array systems” (page 133).
E10000F8
Message
Creation of S-Vol failed. The LU cannot be created.
Explanation
Creation of S-VOL failed.
Recommended action
Perform the following using Storage Management Software:
In addition, delete any unused LUs in cases (1)-(3) below.
• (1) Check whether the number of LUs in the disk array system has reached the maximum.
• (2) Check whether the number of LUs in the RAID/Parity group or THP (Smart) pool has
reached the maximum.
• (3) Confirm that the available space of the specified RAID/Parity group or THP (Smart) pool
is sufficient.
• (4) When you use Account Authentication, confirm that Storage Administrator (View and
Modify) authority is assigned to the user account. If it is not, assign it.
E10000FB
Message
Failed to delete S-Vol:[ LU number of S-VOL] failed. The specified LU is in regressed status.
Explanation
Creation of S-VOL failed.
Recommended action
A failure occurred in the specified RAID/Parity group or THP (Smart) pool. Remove the failure,
then re-execute.
Error messages 95
To Next Page
Loading...
Need help?
General
