HPE Apollo 4200 Gen10 Plus Service Manual

7 Rear panel LEDs
8
1 System board components
9 DIMM slot locations
10 DIMM label identification
11
1 System maintenance switch descriptions
12 Disabling the HPE SR100i Gen10 Plus Software RAID
13 Drive cage numbering
14 Drive numbering
15
1 Drive LEDs
16 Low-profile LFF drive LED definitions
17 Drive LED definitions
18 Drive cage backplane identification
19
1 Storage controller components
20 HPE NS204i-p NVMe OS Boot Device components
21 HPE NS204i-p NVMe OS Boot Device LED definitions
22 DSC-25 2-port SFP28 card ports and LEDs
23 Fan numbering
1
1 Specifications
2 Environmental specifications
3 Mechanical specifications
4 Power supply specifications
5 Hot-plug power supply calculations
1
1 Repair and replacement videos
2
1 Cage 3 videos
3 Cage 3 data cables
4 Cage 3 power cable
5 LFF cage 3 backplane
6 LFF cage 2 to LFF cage 3 data cable
7 SFF cage 3 backplane
8 SFF cage 3 signal cable
9
1 Cage 4 and Cage 5 videos
10 Cage 4 data cable
11 Cage 5 data cable
12
1 Other replaceable parts
13 AC power module
14 OCP NIC adapter
15 Large air baffle
16 DIMM

HPE Apollo 4200 Gen10 Plus Specifications

General

Form Factor	2U
Number of Memory Slots	32 DIMM slots
Remote Management	HPE iLO 5
Processor	Intel Xeon Scalable Processors (3rd Gen)
Memory	DDR4
Storage	SAS, SATA, NVMe
Network	FlexibleLOM, PCIe stand-up cards
Power Supply	1600W
Drive Bays	Up to 28 SFF or 16 LFF drive bays
Expansion Slots	Up to 8 PCIe 3.0 slots
GPU Support	Yes, supports GPUs
Operating System Support	Windows Server, RHEL, SLES, VMware