HPE ProLiant ML30

For detailed power supply specifications, see th QuickSpecs on the Hewlett Packard Enterprise
website.
350W standard non-hot-plug power supply
Specification Value
Input requirements —
Rated input voltage 100 VAC to 240 VAC
Rated input frequency 50 Hz to 60 Hz
Rated input current 5A
Rated input power 427 W at 115 VAC
427 W at 240 VAC
Efficiency No less than 82% at 100% load
No less than 85% at 50% load
No less than 82% at 20% load
Power supply output —
Rated steady-state power 350 W at 115 VAC
350 W at 230 VAC
Maximum peak power 350 W at 115 VAC
350 W at 230 VAC
Rated output power 350 W
HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Specification Value
Input requirements —
Rated input voltage
100 VAC to 240 VAC
240 VDC for China only
Rated input frequency
50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current
5.8 A at 100 VAC
2.8 A at 200 VAC
2.4 A at 240 VDC for China only
Maximum rated input power
557 W at 100 VAC
539 W at 200 VAC
537 W at 240 VDC for China only
Table Continued
Specifications 113