Item Description
18 Front USB connector
19 Storage controller backup power connectors
20 Smart Storage Battery connector
21 TPM connector
22 System battery
23 Slot 4 PCIe3 x8 (4, 1), half-length
2
24 Slot 3 PCIe3 x16 (4, 1), full-length
2
25 Slot 2 PCIe3 x8 (4, 1), half-length
2
26 Slot 1 PCIe3 x16 (16, 8, 4, 1), full-length
2
1
M.2 connector can be connected to Dedicated iLO/serial port/M.2 SSD module as well.
2
For more information on the expansion slot specifications, see "PCIe expansion slot definitions."
System maintenance switch descriptions
Position Default Function
S1
1
Off
Off = iLO 5 security is enabled.
On = iLO 5 security is disabled.
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
S5
1
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
S6
1
,
2
,
3
Off
Off = No function
On = Restore default manufacturing settings
S7 Off Reserved
S8 — Reserved
S9 — Reserved
S10 — Reserved
S11 — Reserved
S12 — Reserved
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all
configuration settings to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some
configurations cannot be restored. For more information, see Secure Boot on page 80.
Component identification 89
To Next Page
Loading...
