Huawei AP4050DN-E - Page 109

4. Tightly bind the PVC tape at the ends of the wrapping section, as shown in Figure
5-121.
Figure 5-121 Tightly binding the PVC tape
Step 2 Fix the DC power cable connector to the PWR port, as shown in Figure 5-122. Ensure that
positive and negative polarities are correct during the installation.
AP4050DN-E
Hardware Installation and Maintenance Guide
5 Appendix
Issue 05 (2018-02-02) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
101