Huawei ATN 950B - Fibers; Fiber Types

Connecto
r Pin
Cable Remarks Connecto
r Pin
Cable Remarks
Core Relations
hip
Core Relations
hip
53 Black Twisted
pair
R14 77 Black Twisted
pair
T14
54 Green 78 Brown
55 Black Twisted
pair
R15 79 Yellow Twisted
pair
T15
56 Grey 80 Blue
Shell External braid shield layer
Technical Specifications
Table 9-18 Technical specifications of the 120-ohm 16 x E1 cable
Item Specification
Cable Trunk Cable, 120 ohm, 16E1, 0.4 mm(0.02 in.), Anea 96F,
120CC32P0.4P430U(S), +45deg
Connector Cable Connector, Anea, 96PIN, Suite Of Female Connector And
Shielding Case, IDC Type, For 24-26 AWG Solid Wire - 1 A
Cable type Twisted-Pair Cable, 120 ohm, SEYVP, 0.4 mm(0.02 in.), 26AWG,
32Pairs, Pantone 430U
Core diameter of the
inner conductor
0.4 mm(0.02 in.)
Number of cores 32 twisted pairs
Available length 5 m, 10 m, 15 m, 20 m, 25 m, 30 m, 35 m, 40 m, 45 m, 50 m
16.40 ft.,32.80 ft.,49.21 ft.,65.62 ft.,82.02 ft.,98.42 ft.,114.83 ft.,
131.23 ft.147.64 ft.,164.04 ft.
9.5 Fibers
This section describes the types of fibers and fiber connectors.
9.5.1 Fiber Types
Single-mode fibers or multi-mode fibers can be used on the ATN 950B.
Table 9-19 lists the types of fibers used on the ATN 950B.
ATN 950B Multi-service Access Equipment
Hardware Description 9 Cables
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108