9 Cables
About This Chapter
This chapter describes various fibers and cables used on the equipment, including power cables,
grounding cables, management cables, clock cables, alarm cables, service cables, and fibers.
9.1 Power Supply Cables and Grounding Cables
This section describes power supply cables and grounding cables used on the equipment.
9.2 Management Cables
On the ATN 950B, Ethernet cables are used to input and output NM signals.
9.3 Clock Cables
The clock cables used on the ATN 950B include external clock cables and 120-to-75-ohm clock
cables.
9.4 Service Cables
The service cables include Ethernet cables, 75-ohm 16 x E1 cables, and 120-ohm 16 x E1 cables.
9.5 Fibers
This section describes the types of fibers and fiber connectors.
ATN 950B Multi-service Access Equipment
Hardware Description 9 Cables
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
89
To Next Page
Loading...
