Huawei ATN 950B - Technical Specifications of FE and GE Electrical Interfaces

Table 13-2 Performance specifications of the FE optical interface
Item Specification
Optical interface
type
Two-fiber bidirectional interface
100BASE-FX
(15 km)
100BASE-FX
(40 km)
100BASE-FX
(80 km)
Fiber type Single-mode Single-mode Single-mode
Working wavelength
range (nm)
1261 to 1360 1263 to 1360 1480 to 1580
Mean launched
optical power (dBm)
-15 to -8 -5 to 0 -5 to 0
Receiver sensitivity
(dBm)
-28 -34 -34
Minimum overload
(dBm)
-8 -10 -10
Minimum extinction
ratio (dB)
8.2 10 10
Optical module code S4015755 S4015715 34060282
NOTE
For details of the optical module, see 7.2 Optical Module Labels.
13.2 Technical Specifications of FE and GE Electrical
Interfaces
The ATN 950B supports GE electrical module and 100 Mbit/s FE service interfaces.
Table 13-3 lists technical specifications of GE electrical module; Table 13-4 lists technical
specifications of FE electrical interfaces.
Table 13-3 Specifications of the GE electrical module
Item
Specification Requirement
Interface rate 1000 Mbit/s.
RJ-45 electrical interface
specification
Complies with IEEE 802.3.
ATN 950B Multi-service Access Equipment
Hardware Description 13 Interface Specifications
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
124