Huawei ATN 950B - AND1 EX1 - 1 Channel 10 GE Optical Interface Board; Overview; Functions and Features

Item Specification
Minimum extinction
ratio (dB)
8.2 10 10
Optical module code S4015755 S4015715 34060282
NOTE
For details of the optical module, see 7.2 Optical Module Labels.
Physical Specifications
Board dimensions (mm): 22.86 (H) x 225.75 (D) x 193.80 (W)
Weight (kg): 0.46
Power consumption (W, room temperature): 18.7
5.5 AND1EX1 - 1 Channel 10 GE Optical Interface Board
This section describes the AND1EX1 (a 1 channel 10 GE optical interface board), in terms of
version, function, principle, front panel, and technical specifications.
5.5.1 Overview
The AND1EX1 (EX1 for short) is a one channel 10 GE optical interface board. The function
version of the EX1 is AND1. The AND1EX1 is housed in any of slots 5 to 6 (when working
with the AND1CXPA) and in any of slots 3 to 6 (when working with the AND1CXPB).
5.5.2 Functions and Features
The AND1EX1 mainly accesses one channel of 10 GE signal, and processes the services with
the AND1CXPA/AND1CXPB.
Table 5-17 lists the functions and features of the AND1EX1.
Table 5-17 Functions and Features of the AND1EX1
Function and Feature
Description
Basic function Supports one 10GE optical interfaces. Accesses 1 x 10GE
signal, and processes the services with the AND1CXPA/
AND1CXPB.
Supports the hot swappable function.
Detects the temperature and voltage of the board.
Interface function Supports PHY-layer inloop and outloop.
Supports MAC-layer outloop.
ATN 950B Multi-service Access Equipment
Hardware Description 5 Physical Interface Card
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
56